Development and Validation of Kompetitive Allele-Specific PCR Assays for Erucic Acid Content in Indian Mustard [Brassica juncea (L.) Czern and Coss.].

Brassica juncea L. is the most widely cultivated oilseed crop in Indian subcontinent. Its seeds contain oil with very high concentration of erucic acid (≈50%). Of late, there is increasing emphasis on the development of low erucic acid varieties because of reported association of the consumption of high erucic acid oil with cardiac lipidosis. Erucic acid is synthesized from oleic acid by an elongation process involving two cycles of four sequential steps. Of which, the first step is catalyzed by ß-ketoacyl-CoA synthase (KCS) encoded by the fatty acid elongase 1 (FAE1) gene in Brassica. Mutations in the coding region of the FAE1 lead to the loss of KCS activity and consequently a drastic reduction of erucic acid in the seeds. Molecular markers have been developed on the basis of variation available in the coding or promoter region(s) of the FAE1. However, majority of these markers are not breeder friendly and are rarely used in the breeding programs. Present studies were planned to develop robust kompetitive allele-specific PCR (KASPar) assays with high throughput and economics of scale. We first cloned and sequenced FAE1.1 and FAE1.2 from high and low erucic acid (<2%) genotypes of B. juncea (AABB) and its progenitor species, B. rapa (AA) and B. nigra (BB). Sequence comparisons of FAE1.1 and FAE1.2 genes for low and high erucic acid genotypes revealed single nucleotide polymorphisms (SNPs) at 8 and 3 positions. Of these, three SNPs for FAE1.1 and one SNPs for FAE1.2 produced missense mutations, leading to amino acid modifications and inactivation of KCS enzyme. We used SNPs at positions 735 and 1,476 for genes FAE1.1 and FAE1.2, respectively, to develop KASPar assays. These markers were validated on a collection of diverse genotypes and a segregating backcross progeny. KASPar assays developed in this study will be useful for marker-assisted breeding, as these can track recessive alleles in their heterozygous state with high reproducibility.

Irreversible Pulpitis - A Source of Antibiotic Over-Prescription?

Antibiotic resistance is a growing public health concern. Antibiotics continue to be prescribed by some clinicians to resolve dental pain even though research indicates that antibiotics are not effective for treating conditions such as irreversible pulpitis. The objective of this study was to determine the extent to which current research and evidence around irreversible pulpitis has been translated into dental practice and the gaps in dentists' knowledge. An on-line clinical vignette format survey questionnaire about treatment of irreversible pulpitis was distributed to the members of the Academy of Operative Dentistry and Academy of General Dentistry (US based international dental bodies). Their responses were recorded and evaluated. A total of 403 dentists participated in the survey. Over a third (39.3%) indicated they would prescribe antibiotics for symptomatic irreversible pulpitis in a permanent tooth occurring without any signs of systemic infection. The rest indicated they would not prescribe antibiotics; most of them would prescribe an analgesic combined with pulpectomy. Those who had undertaken advanced education training achieved a significantly higher mean knowledge score compared to those with just a primary dental degree (p=0.011). Similarly, full or part time academicians had a higher mean knowledge score than the clinicians who work only in private practice (p=0.014). Some dentists continue to prescribe antibiotics inappropriately for alleviating pain due to irreversible pulpitis. Antibiotic prescribing practices of dentists with advanced education or academic engagement were better as compared to the other participants. There is clear evidence of antibiotic over-prescribing for irreversible pulpitis which needs to be addressed urgently.

Irreversible pulpitis - a source of antibiotic over-prescription?

Abstract Antibiotic resistance is a growing public health concern. Antibiotics continue to be prescribed by some clinicians to resolve dental pain even though research indicates that antibiotics are not effective for treating conditions such as irreversible pulpitis. The objective of this study was to determine the extent to which current research and evidence around irreversible pulpitis has been translated into dental practice and the gaps in dentists' knowledge. An on-line clinical vignette format survey questionnaire about treatment of irreversible pulpitis was distributed to the members of the Academy of Operative Dentistry and Academy of General Dentistry (US based international dental bodies). Their responses were recorded and evaluated. A total of 403 dentists participated in the survey. Over a third (39.3%) indicated they would prescribe antibiotics for symptomatic irreversible pulpitis in a permanent tooth occurring without any signs of systemic infection. The rest indicated they would not prescribe antibiotics; most of them would prescribe an analgesic combined with pulpectomy. Those who had undertaken advanced education training achieved a significantly higher mean knowledge score compared to those with just a primary dental degree (p=0.011). Similarly, full or part time academicians had a higher mean knowledge score than the clinicians who work only in private practice (p=0.014). Some dentists continue to prescribe antibiotics inappropriately for alleviating pain due to irreversible pulpitis. Antibiotic prescribing practices of dentists with advanced education or academic engagement were better as compared to the other participants. There is clear evidence of antibiotic over-prescribing for irreversible pulpitis which needs to be addressed urgently.

Resumo A resistência aos antibióticos é uma preocupação crescente para a saúde pública. Os antibióticos continuam a ser prescritos por alguns dentistas para resolver a dor dentária, embora pesquisas indiquem que os antibióticos não são eficazes no tratamento de condições como a pulpite irreversível. O objetivo deste estudo foi determinar em que medida as pesquisas atuais e as evidências em torno da pulpite irreversível foram traduzidas em prática odontológica e as lacunas existentes no conhecimento dos dentistas. Um questionário de pesquisa em formato de vinheta clínica on-line sobre o tratamento da pulpite irreversível foi distribuído para os membros da Academia de Odontologia Operatória e da Academia de Odontologia Geral (órgãos dentários internacionais dos EUA). Suas respostas foram registradas e avaliadas. Um total de 403 dentistas participou da pesquisa. Mais de um terço (39,3%) indicaram que prescreveriam antibióticos para pulpite irreversível sintomática em um dente permanente sem qualquer sinal de infecção sistêmica. O restante respondeu que eles não prescreveriam antibióticos; a maioria deles prescreveria um analgésico combinado com pulpectomia. Aqueles que realizaram o treinamento de educação avançada obtiveram uma pontuação de conhecimento médio significativamente maior em comparação com aqueles com apenas um grau primário de conhecimento odontológico (p=0,011). Da mesma forma, acadêmicos em tempo integral ou parcial tiveram uma pontuação média de conhecimento maior do que os clínicos que trabalham apenas em consultório particular (p=0,014). Alguns dentistas continuam a prescrever antibióticos inadequadamente para aliviar a dor decorrente de pulpite irreversível. Práticas de prescrição de antibióticos por dentistas com educação avançada ou envolvimento acadêmico foram melhores em comparação com os outros participantes. Há evidências claras de excesso de prescrição de antibiótico para pulpite irreversível que precisa ser tratada com urgência.

Effects of ferrule and diameter of parallel cast post and core on fracture resistance / Efeitos da férula e diâmetro de núcleos metálicos paralelos na resistência a fratura

Objective: The aim of this study was to evaluate the effects of using different diameters of parallel cast posts with, or without ferrule, on the overall fracture resistance of Cast Post and Core (CPC). Material and Methods: Forty (40) endodontically treated human maxillary central incisors were divided into four groups (n=10): [F1] 1.0 mm diameter post with ferrule; [NF1] 1.0 mm diameter cast post without ferrule; [F1.5] 1.5 mm diameter cast post with ferrule; [NF1.5] 1.5 mm diameter post without ferrule. For all teeth, the post space (9.0 mm, in depth) was prepared using ParaPostTM drill. CPC using base metal alloy were fabricated and were cemented using resin modified glass ionomer (RMGI) cement along with the Porcelain Fused to Metal (PFM) crowns. A universal testing machine (Instron) was used to apply horizontal force perpendicular to the long axis of the tooth at the center of lingual surface, until catastrophic failure. Data was submitted to two-way ANOVA and Scheffé tests (P<0.05). Results: Both post diameter and ferrule statistically affected the maximum load at fracture (P=0.004 and P=0.013, respectively). The highest mean values were observed for samples with ferrule and wider post size (490N), while the lowest were observed for samples without ferrule and narrower post size (254N). There was no relationship between the presence of a ferrule and post size (P=0.937). Conclusion: For endodontically treated teeth with no ferrule, a wider-diameter cast post increased fracture resistance of a CPC and PFM crown procedure. (AU)

Objetivo: O objetivo do presente estudo foi avaliar os efeitos de diferentes diâmetros de núcleos metálicos paralelos (com ou sem férula) na resistência a fratura do procedimento restaurador. Material e Métodos: Quarenta (40) incisivos centrais superiores humanos foram tratados endodonticamente e divididos em quarto grupos (n=10): [F1] Diâmetro de 1.0 mm, com férula; [NF1] Diâmetro de 1.0 mm, sem férula; [F1.5] Diâmetro de 1.5 mm, com férula; [NF1.5] Diâmetro de 1.5 mm, sem férula. Para todos os dentes, o espaço foi preparado para o núcleo (9.0 mm, em comprimento) utilizando brocas do ParaPostTM. Os núcleos metálicos e as coroas metalocerâmicas fabricadas foram cimentados utilizando-se cimento de ionômero de vidro modificado por resina. Uma máquina de ensaios universal (Instron) foi utilizada para aplicar uma força horizontal perpendicular ao longo eixo do dente, no centro da face lingual, até falha catastrófica. Os dados foram analisados através de análise de variância de dois fatores e teste de Scheffé (p<0.05). Resultados: O diâmetro do núcleo e a presença (ou ausência) de férula afteram estatiscamente a resistência máxima a fratura do procedimento (P=0.004 e P=0.013, respectivamente). Os maiores valores foram observados para amostras com férula e de maior diâmetro (490N), enquanto os menores valores foram observados para amostras sem férula e de menor diâmetro (254N). Conclusão: Para dentes tratados endodondicamente, com férula, um núcleo de maior diâmetro aumentou a resistência a fratura de procedimentos restauradores envolvendo coroas metalocerâmicas cimentadas sobre núcleos metálicos fundidos. (AU)

Resorbable versus titanium plates for orthognathic surgery.

BACKGROUND: Recognition of some of the limitations of titanium plates and screws used for the fixation of bones has led to the development of plates manufactured from bioresorbable materials. Whilst resorbable plates appear to offer clinical advantages over metal plates in orthognathic surgery, concerns remain about the stability of fixation and the length of time required for their degradation and the possibility of foreign body reactions. This review compares the use of titanium versus bioresorbable plates in orthognathic surgery and is an update of the Cochrane Review first published in 2007. OBJECTIVES: To compare the effects of bioresorbable fixation systems with titanium systems used during orthognathic surgery. SEARCH METHODS: Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 20 January 2017); the Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 11) in the Cochrane Library (searched 20 January 2017); MEDLINE Ovid (1946 to 20 January 2017); and Embase Ovid (1980 to 20 January 2017). We searched the US National Institutes of Health Ongoing Trials Register ClinicalTrials.gov (clinicaltrials.gov; searched 20 January 2017), and the World Health Organization International Clinical Trials Registry Platform (searched 20 January 2017) for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: Randomised controlled trials comparing bioresorbable versus titanium fixation systems used for orthognathic surgery in adults. DATA COLLECTION AND ANALYSIS: Two review authors independently screened the results of the electronic searches, extracted data and assessed the risk of bias of the included studies. We resolved disagreement by discussion. Clinical heterogeneity between the included trials precluded pooling of data, and only a descriptive summary is presented. MAIN RESULTS: This review included two trials, involving 103 participants, one comparing titanium with resorbable plates and screws and the other titanium with resorbable screws. Both studies were at high risk of bias and provided very limited data for the primary outcomes of this review. All participants in one trial suffered mild to moderate postoperative discomfort with no statistically significant difference between the two plating groups at different follow-up times. Mean scores of patient satisfaction were 7.43 to 8.63 (range 0 to 10) with no statistically significant difference between the two groups throughout follow-up. Adverse effects reported in one study were two plate exposures in each group occurring between the third and ninth months. Plate exposures occurred mainly in the posterior maxillary region, except for one titanium plate exposure in the mandibular premolar region. Known causes of infection were associated with loosened screws and wound dehiscence with no statistically significant difference in the infection rate between titanium (3/196), and resorbable (3/165) plates. AUTHORS' CONCLUSIONS: We do not have sufficient evidence to determine if titanium plates or resorbable plates are superior for fixation of bones after orthognathic surgery. This review provides insufficient evidence to show any difference in postoperative pain and discomfort, level of patient satisfaction, plate exposure or infection for plate and screw fixation using either titanium or resorbable materials.

A Comparison of the Bleaching Effectiveness of Chlorine Dioxide and Hydrogen Peroxide on Dental Composite

This study was carried out to verify if composites could be bleached using chlorine dioxide as compared with hydrogen peroxide. 3M ESPE Filtek Z350 Universal Restorative discs were prepared (n=40), with dimensions 5 mm diameter x 2 mm thickness. The discs were divided into 4 groups of 10 discs each. Color assessment was performed by CIEDE2000. The discs were stained with coffee, tea, wine and distilled water (control) solutions for 14 days, 5 hours daily. Color assessment was repeated on stained discs and followed by bleaching of 5 discs from each group using chlorine dioxide and hydrogen peroxide in-office systems. Finally, a last color assessment was performed and compared statistically. DE2000 after bleaching was very close to baseline for both the bleaching agents, although chlorine dioxide showed better results than hydrogen peroxide. After staining, there was a clinically significant discoloration (∆E2000≥3.43) for the tea, coffee and wine groups, and discoloration (∆E2000) was seen more in the wine group as compared to tea and coffee. Overall, the control group (distilled water) had the least color change in the three intervals. After bleaching, the color in all specimens returned close to the baseline. The color differences between bleaching and baseline were less than 3.43 for all groups. The obtained results show that chlorine dioxide is slightly superior to hydrogen peroxide in the bleaching of composites, while maintaining the shade of the composite close to the baseline.

Este estudo foi realizado para verificar se resinas compostas podem ser clareadas com uso do dióxido de cloro, em comparação com peróxido de hidrogênio. Foram preparados discos com resina restauradora Filtek Z350 3M ESPE (n=40), com dimensões 5 mm de diâmetro × 2 mm de espessura. Os discos foram divididos em 4 grupos de 10 discos cada. A avaliação da cor foi realizada por meio do CIEDE2000. Os discos foram manchados com soluções de café, chá, vinho e água destilada (controle) por 5 h diárias durante 14 dias. A avaliação da cor foi repetida nos discos manchados e seguida por clareamento de 5 discos de cada grupo, utilizando dióxido de cloro ou peróxido de hidrogênio pela técnica de consultório. Finalmente, uma última avaliação da cor foi realizada e as técnicas comparadas estatisticamente. DE2000 após o clareamento foi muito próxima ao baseline, para ambos os agentes clareadores, embora o dióxido de cloro tenha mostrado melhores resultados do que o peróxido de hidrogênio. Após o manchamento, houve uma descoloração clinicamente significativa (ΔE2000≥3,43) para os grupos de chá, café e vinho, sendo que o clareamento (ΔE2000) foi melhor obtido com o grupo do vinho, em comparação com chá e café. No geral, o grupo controle (água destilada) teve a menor mudança de cor nos três intervalos. Após o clareamento, a cor em todos os espécimes voltou próxima ao baseline. As diferenças de cor entre o clareamento e o baseline foram inferiores a 3,43 para todos os grupos. Os resultados indicam que o dióxido de cloro é ligeiramente superior ao peróxido de hidrogênio no clareamento de resinas compostas, mantendo a cor próxima à escala do baseline.

A comparison of the bleaching effectiveness of chlorine dioxide and hydrogen peroxide on dental composite.

This study was carried out to verify if composites could be bleached using chlorine dioxide as compared with hydrogen peroxide. 3M ESPE Filtek Z350 Universal Restorative discs were prepared (n=40), with dimensions 5 mm diameter x 2 mm thickness. The discs were divided into 4 groups of 10 discs each. Color assessment was performed by CIEDE2000. The discs were stained with coffee, tea, wine and distilled water (control) solutions for 14 days, 5 hours daily. Color assessment was repeated on stained discs and followed by bleaching of 5 discs from each group using chlorine dioxide and hydrogen peroxide in-office systems. Finally, a last color assessment was performed and compared statistically. DE2000 after bleaching was very close to baseline for both the bleaching agents, although chlorine dioxide showed better results than hydrogen peroxide. After staining, there was a clinically significant discoloration (∆E2000≥3.43) for the tea, coffee and wine groups, and discoloration (∆E2000) was seen more in the wine group as compared to tea and coffee. Overall, the control group (distilled water) had the least color change in the three intervals. After bleaching, the color in all specimens returned close to the baseline. The color differences between bleaching and baseline were less than 3.43 for all groups. The obtained results show that chlorine dioxide is slightly superior to hydrogen peroxide in the bleaching of composites, while maintaining the shade of the composite close to the baseline.